• Home > products > Tension Testing Series > Micro drop tester (single station)
    Micro drop tester (single station)
    This machine is suitable for repeated drop test of mobile phone, handset, walkie talkie, MP3, CD, electronic dictionary and other small electronic consumer products

    Model:HK-DDW-1

    Update time:[2019-11-19]
    Feature Parameter Standard?Compliance

    I. instrument introduction:

    The micro drop test machine is suitable for repeated drop test of small electronic consumer products such as mobile phones, telephone receivers, walkie talkies, MP3, CD, electronic dictionaries, etc.

    II. Design principle:

    The lifting motor drives the upper clamp (air finger) down to clamp and lift the mobile phone, release the air finger, and the mobile phone will fall freely. At this time, the double acting cylinder telescopes and pushes the mobile phone to the position that the upper clamp can clamp. The lifting motor drives the upper clamp (air finger) down to clamp and lift the mobile phone, and birch open the air finger. The mobile phone will fall freely, so repeatedly until the set number of times.

    技術參數:

    同時跌落手機

    1-2

    允許試件重量

    2kg(max)

    跌落最大尺寸

    100X160mm

    跌落高度

    60-150mm

    測試速度范圍

    6~20次/min

    PLC控制器及觸摸屏

    1

    機器尺寸

    W420*H800*D370mm

    機器重量

    約80kg

    氣源

    ≥0.5Mpa

    電源

    AC 220V 或指定

    備注

    制作部分電氣與主體為一體式

    III. features:

    It can set the height and times, and stop automatically,

    Drop surface material: aluminum, 12mm thick. Six reset cylinders are used at the drop.

    Prompt function: it can set the setting value of key times and automatically stop the test.

    This machine adopts Japanese stepping motor, SMC cylinder as the driving source of lifting and dropping of mobile phone, with precise double acting cylinder as return action, durable use; it can realize repeated dropping of mobile phone and other products, so as to test the impact resistance of products falling from a certain height;

    Due to the use of pneumatic components and autocratic control mode, greatly improve the test speed and consistency; use LCD touch-screen Japanese PLC as the action program control; independent counting, reaching the set number of times to automatically stop the test

    Related products
    Products
    Relevant news

    skype:0755-29437880

    Phone:13342990691

    email:sales@hkgd17.com

    Ali Wangwang:13342990691

    QQ:583992516